DH30 Firmware

There are three versions of DH30, with different hardwares.
From DH30, DH30 V2, to DH30 V5, the firmware cannot be used interchangeably due to continuous iteration and hardware differences.
if spot welder still show the old firmware version, you can delete the .bin file in U disk, then copy again.
If copy the wrong firmware, the spot welding machine cannot be turned on,you can do firmware upgrade again.

DH30 V5

(Laser marking DH30 V5 on the front of the spot welding machine,have no USB output functions)

Version:  DH30 V5 Firmware V5.031 Click to download
Main Update:
Release Date:2023-12

DH30 V5 upgrade steps:

Before upgrade the newest firmware, please power off the spot welder first
Can only copy the .bin file to U disk,if copy wrong,spot welder will not power on.

1. Power off the spot welder,then connect the data wire to computer , your computer will show a USB disk;
2. Copy the .bin new firmware to U disk,when finish,disconnect data wire,power off and power on,Done.


DH30 V2

(Laser marking DH30 V2 on the front of the spot welding machine,have USB output functions)

Version:  DH30 V2 Firmware V3.02 Click to download
Main Update:
Release Date:2023.2

DH30 V2 upgrade steps:

Before upgrade the newest firmware, please power off the spot welder first
Can only copy the .bin file to U disk,if copy wrong,spot welder will not power on.

1. Power off the spot welder,then connect the data wire to computer , your computer will show a USB disk;
2. Copy the .bin new firmware to U disk,when finish,disconnect data wire,power off and power on,Done.


DH30

(No Laser marking DH30 on the front of the spot welding machine,have USB output functions)

Version:  DH30 Firmware V2.6 Click to download
Main Update:
Release Date:2021.6

DH30 upgrade steps:

Before upgrade the newest firmware, please power off the spot welder first
Can only copy the .bin file to U disk,if copy wrong,spot welder will not power on.

1. Power off the spot welder,then long click the “Power On” button,not release,hold,then spot welder screen will show “firmware upgrade” informations ;
2. Still hold, then connect the data wire to computer,spot welder screen will show “Firmware to U disk”, your computer will show a USB disk,then release the “Power on” button;
3. Copy the .bin new firmware to U disk,when finish,disconnect data wire,power off and power on,Done.

Share this post: